The House America Is Talking About

Article written by Orange County Historian Johanna Yaun

Almost 70 years later, a few still stand in Orange County

Many people have heard of the pre-fab homes that Sears, Roebuck and Company produced between 1908-1940. Sears offered 370 models and over 70,000 were built across the nation. Many of these homes are still standing around Orange County but they are difficult to spot because they used conventional balloon-framing techniques and materials in their kits. But, our local architectural variety includes another story of a pre-fab housing solution from the 20th century that is less familiar.

For a short two years, from 1948 to 1950, the Lustron Corporation created pre-fabricated enameled steel homes that were advertised as low maintenance and affordable.

The idea began with a Chicago inventor named Carl Strandlund who, in response to the post-World War II housing storage, created a division of the Chicago Vitreous Enamel Corporation to construct homes in a Columbus, Ohio factory. They planned to construct over 45,000 homes but only 2,498 homes were completed. Although they had orders for over 8,000 more units, after only 20 months of operation, the company closed its doors and 800 employees were laid off. The closure was due to failing to repay a 12.5 million Federal agency Reconstruction Finance Corporation (RFC) loan that was borrowed to begin production. The Lustron Corp. was selling the homes at a low cost between $6,000-$10,000 per unit and the company was losing money on each order. Although the cost seems inexpensive, the Lustron homes were sold through a dealership system similar to automobiles distribution which meant the dealers had to cover the initial costs of purchasing lots, pouring concrete slabs and running utility lines. The final home purchaser would be paying around $11,000 to acquire the completed property which was considerably more than buying a typical wood frame house at the time.

The architectural prototype was created in collaboration with architects Roy Burton Blass and Morris H. Beckman as a 1,000 square foot, two-bedroom home made of steel framing. The exposed steel on the interior walls and roof had a porcelain-enamel finish. The manufacture of each home required 12 tons of steel and 1 ton of enamel. The customer could choose the colors from a number of options including pink, tan, yellow, aqua, blue, green and gray on the exterior and beige or gray for the interior. The 3,000 pre-made parts would be carried on a truck and assembled on a concrete slab.

The homes were designed to use space effectively. Every room had built-ins which accounted for over 20% of the home’s square footage. The bedroom had a vanity, the dining room had a buffet and pocket doors throughout the home eliminated the need to allocate space for a swinging door. One futuristic luxury that was included in every home was a built-in washing machine that with the addition of a rack could do double-duty as a dishwasher.

A few months ago I was alerted to the existence of some of these gems, two in Middletown and one in Highland Falls. After a bit of commentary from the Facebook community on the Orange County History and Heritage page, a follower pointed out a street in Newburgh that featured a cul-de-sac with four Lustron homes. Please let us know if you know of any more in the area because the Preservation League of New York is compiling an inventory for their records.

One Comment

  • There was a Lustron house on the north side of North Street, just east of the Jewish Community Center. I think that it was built a disabled WW II veteran. I left Newburgh in 1973 so I may be a little off on the street name.